Quantity	Units	Frequency
20	each	Monthly
Price	Funds	Per Unit
1	USD	each

Machinery and Equipment - Roll force measurement gauge. 1. Function: The roll force measurement gauge is mainly used for real time measurement of roll force in cold and hot rolling mills. Accurate measurement of roll force is crucial in achieving correct roll gap settings, true force distribution and roll eccentricity. The CH series roll force measurement gauge incorporates all these essential features. Contact Sales Manger Cathy by email: chentx at ablyy dot com. 2. Features: CH Series roll force measurement gauge is a new generation roll force measurement gauge developed by Optec itself. It improves the whole system¡¯s response speed, detection precision and reliability, and resistance to impaction and overload with little maintenance and competitive price. 3. Components: a. Controller b. Roll force measurement sensor 4. Technical Data: Accuracy: Better than ¡À0.5% Sensor: Working Temp.: Standard Type: 0-95¡æ, High-Temp. Type: -20-1200¡æ Measurement Type: Pressure Type, Pulling Type Shape Type: Square Type, Round Type and other customized shape Controller: Working Temperature: 0-50¡æ Display: VAG graph, big LED with 4 digits

Quantity	Units	Frequency
20	each	Monthly
Price	Funds	Per Unit
1	USD	each

Machinery and Equipment - Width measurement gauge. 1. Function: The width measurement gauge is perfectly used for online width measurement of cold/hot strip rolling mills with stable functions, high accuracy, and quick response. It gives real time digital / analog output of the width in automation control system for steel rolling mills. It is also an ideal choice for online width measurement for other metal plates, rubber sheets, papers, etc Contact Sales Manger Cathy by email: chentx at ablyy dot com. The ABLY Series width measurement gauge uses high speed high accuracy CCD sensors, measures the edge of the strip at the same time, and gets digital signals directly. According to the geometric relation, the space coordinates of the two edges can be determined and thus the actual width value is calculated. 2. Features: ƒÜ Real time online measurement of strip width, automatic compensation to the strip jumping, tilting, moving and deflation. ƒÜ Real time and historical data display and storage, products and operator information, measurement time and MIS system connection gives automatic daily reports and shift reports. ƒÜ Measure actual width, width deviation, centerline deviation and communicate with automation system. ƒÜ Independent automatic calibration system, intelligent malfunction self diagnosis system, no maintenance system. ƒÜ Plate comprehensive quality assessment system. ƒÜ Optical vibration compensation, mechanical vibration compensation system. ƒÜ Multiple communication interface¡Asuch as RS485, TCP/IP, Prefabs, UDP/IP etc.(Fixed during basic design by both parties.) Signal communication with basic automation system and L2 system. (Strip number and nominal width set up) the malfunctions signal can be transmitted to the computer system. 3. Components: a. Sensors box (with measurement sensors) b. Adapter box c. Control cabinet (with measurement server) 4. Technical Data: ƒÜ Width range¡G100¡Ð3600mm¡F ƒÜ ƒÜ Steel temperature ¡G 0-1800¢J¡F ƒÜ ƒÜ Steel thickness ¡G0.5-300mm¡F ƒÜ ƒÜ Scanning rate ¡GMax. 2k/sec¡F ƒÜ ƒÜ Output rate¡G50-250 /sec¡F ƒÜ ƒÜ Inline accuracy : static better than „b0.3 mm¡Adynamic better than „b0.5mm ¡] 2£m¡^¡F ƒÜ ƒÜ Static repeatability ¡Gbetter than ¡Ó0.1 mm ¡]2£m¡^ ƒÜ ƒÜ Display: VGA graph ¡F ƒÜ ƒÜ Steel moving¡Gwithin roller table ¡F ƒÜ ƒÜ Strip jumping : smaller then 400mm¡F ƒÜ ƒÜ Drift ¡Gbetter than ¡Ó0.2mm/24 hours¡F ƒÜ ƒÜ Communication ¡G TCP/IP¡BUDP/IP¡BProfitbus-DP¡BRS-485 optional¡F ƒÜ ƒÜ Input and output¡GRS-485¡A4-20mA,0-10V¡Ajoints or named by users. ƒÜ ƒÜ Output signal¡Gdeviation signal, width signal, centerline deviation, opto-acoustic warning ¡B equipment condition and data validity¡Fhistorical record¡Bcomprehensive assessment¡F ƒÜ ƒÜ Power supply ¡G220V¡Ó10¢H

Quantity	Units	Frequency
50	each	Yearly
Price	Funds	Per Unit
1	USD	each

Machinery and Equipment - Hydraulic AGC(Automatic Gauge Control) system. 1. Function: In modern strip rolling mills lines, hydraulic AGC (Automatic Gauge Control) system has replaced the old electric screw-down AGC system. Hydraulic AGC system uses a pair of hydraulic screw-down/up cylinders (one for each side of the mill) to change the gap between the work rolls and the rolls act on the strip by generating a rolling force to control the thickness of the strip and keep the desired flatness of the strip. Contact Sales Manger Cathy by email: chentx at ablyy dot com. 2. Features: The GK series hydraulic AGC (Automatic Gauge Control) system developed by ABLYY is a revolutionary solution for rolling mills. It is widely used in hot strip rolling mills with excellent performance of stability, accuracy, and simplicity. The hydraulic AGC system is based on high performance computers and network technology and powerful software features and realizes all-digital thickness control. Position control and pressure control respectively aimed roll gap and rolling pressure of the roller cylinder constitute a basic control inner loop of AGC system, and it can be up to ¦Ìm class of integrated control accuracy. Thickness control (thickness closed-loop control) aims steel strip thickness at the exit of the mill, which constitutes a comprehensive controlling outer loop of AGC. We realize a variety of AGC controlling models through compensation control of depressive cylinder combined with mill stretch model , material stretch model, rolling speed and tensile setting with timely adjust, then we can control the strip thickness deviation and plate shape of target products. We are the sole supplier in China for all the following systems and services: ¡ô Hardware and software of AGC (automatic gauge control )system; ¡ô Hydraulic servo systems and hydraulic cylinders; ¡ô Roll gap measurement gauge, roll force measurement gauge, shape meter, width measurement gauge; ¡ô Hydraulic AGC (automatic gauge control )system completely made by ABLYY ; ¡ô All soft ware and hard ware are designed manufactured and calibrated by ABLYY. 3. Components: a. Hydraulic station b. PLC Cabinet c. Main Control Cabinet and HMI d. Sensors and cylinders 4. Technical Data: Strip thickness before rolling (mm) Achieved value Deviation Length 1.0-4.0 ¡À35¦Ì 95% 4.0-6.0 ¡À55¦Ì 95% 7.0 and above ¡À100¦Ì 95%

Quantity	Units	Frequency
1	each	Weekly
Price	Funds	Per Unit
108000	USD	each

Machinery and Equipment - used Tadano mobile crane 50t. used Tadano truck crane Model:TG500E-3 Capacity:50ton YOM:1998Y Origin:Japan Chassis&engine:Nissan 4 booms 42m length computer controlling Excellent condition Original from Japan

Quantity	Units	Frequency
1	each	One Time Only
Price	Funds	Per Unit
95,000.00	USD	each

Machinery and Equipment - Heavy Duty Crankshaft Lathe. Wickes, Large, Heavy Duty Crankshaft Lathe for turning mains and pins, 66'' (1676mm) Swing x 348'' (8840mm) in length capacity, diameter over cross slide 40'' (1000mm), Max Throw of C'Shaft 14'' (355mm), length between centers, 25 ft (7600mm), max machining length 22 ft (6700mm), Double End Drives, Motorized Steady Rest / Support, 3 Position Index Tool Turret, (2) Pot Chucks and Accessories.

Quantity	Units	Frequency
10	each	Monthly
Price	Funds	Per Unit
9,000.00	USD	each

Machinery and Equipment - gear in ball mill. We can supply all kinds of forging or casting gears used in ball mill, rotary kiln, cooling machine, rotary dryer, mixing machine and so on.

Quantity	Units	Frequency
5	each	Monthly
Price	Funds	Per Unit
12,000.00	USD	each

Machinery and Equipment - Heavy-duty gearbox/reducer. Newfoton gearbox is made of superior low carbon alloy steel. Through carburization, quenching, milling gear, hardness of gear can get 58¡ª62HRC, precision is grade 6-8. It can be mounted with solid shaft, hollow shaft, flange, spline hollow shaft, keyway hollow shaft and so on. Brake, backstops are available. It is widely used in steel plants, cement industry, mine industry, chemical industry, ports and so on. The newest generation harden face gearbox with£º 1£® Modular design with compact design. 2£® High load capacity and low noise. 3£® High efficiency and long life 4£® Small volume and light weight Please feel free to contact us for more information.

Quantity	Units	Frequency
50	each	Weekly
Price	Funds	Per Unit
500.00	USD	each

Machinery and Equipment - slew drive of solar tracker in stock. Slew drive is a new type rotary part. Advantages of Newfoton slew drives are: 1. Quick fit, easy self-assembly. Simple bolt-on procedure means no skilled installers or additional machining. 2. Fewer moving parts provide notably uprated reliability and reduced maintenance. 3. Eliminates the need for complex worm and gearbox mechanisms - even in the heaviest duty applications. 4. Smooth boom rotation. Large tooth contact for minimum wear. 5. Three different sizes to suit all standard hydraulic motor drives to provide the perfect match to your unit. Our slew drives can be used in movable gantry crane, straddle carrier, harbour mobile crane, sewage treatment, solar power station and so on. Please feel free to contact us for more information.

Quantity	Units	Frequency
500	Kg.	Daily
Price	Funds	Per Unit
5.0	USD	Kg.

Machinery and Equipment - Welding. Low alloy steel welding rod Molybdenum and chrome-molybdenum heat resistant welding rod Low temperature steel welding rod Stainless steel welding rod Surfacing welding rod Cast iron welding rod Nickel base alloy welding rod Welding wire Baked flux

Quantity	Units	Frequency
1	each	Monthly
Price	Funds	Per Unit
542	USD	each

Machinery and Equipment - slew drive in aerial lift . Slew drive is a new type rotary part. Advantages of Newfoton slew drives are: 1. Quick fit, easy self-assembly. Simple bolt-on procedure means no skilled installers or additional machining. 2. Fewer moving parts provide notably uprated reliability and reduced maintenance. 3. Eliminates the need for complex worm and gearbox mechanisms - even in the heaviest duty applications. 4. Smooth boom rotation. Large tooth contact for minimum wear. 5. Three different sizes to suit all standard hydraulic motor drives to provide the perfect match to your unit. Our slew drives can be used in movable gantry crane, straddle carrier, harbour mobile crane, sewage treatment, solar power station and so on. Please feel free to contact us for more information.

Quantity	Units	Frequency
1	each	Daily
Price	Funds	Per Unit
75000	USD	each

Machinery and Equipment - used Tadano crane GT650E 65t 2007Y model. used Tadano truck crane Capacity:65t Model:GT650E-3 Carrier:Nissan YOM:2007Y 5 booms 42m length 2 jibs 9-15m length computer controlling good condition We also have Kato 20t,25t,30t,35t,40t,45t,50t,80t,100t,120t & Tadano 15t,20t,25t,30t,35t,40t,45t,50t,55t,65t,75t,130t & Liebherr 260t,500t, Grove 300t, Demag 30t,100t,120t truck crane And P&H20t,40t,Kobelco50t,Hitachi50t,200t, Liebherr80t, Linkbelt30t,Nissha40t,50t,Sumitomo150t crawler crane And Kato 25t,45t,50t,Tadano 25t,50t, Liebherr 30t rough terrain crane in my yard for sale now.